If you feel your Windows 10 booting too long, check out this article right away.
It can be said that one of the most inhibitory problems of Windows is the boot time. If your computer uses SSD, this problem shouldn’t bother you. However, if the computer still uses a traditional hard drive, this is a completely different matter. And especially, if your Windows still boots but for too long this article will give you some suggestions to fix it as follows.
1. Disable Fast Boot
So far, one of the most controversial features about Windows 10’s advantages and disadvantages is Fast Boot. This is a built-in feature that activates itself after the user finishes installing Windows 10 with the hardware drivers.
Fast Boot is a combination of hibernate (Hibernate) mode and the process of shutdown (Shutdown), which helps the system significantly reduce startup time. When you turn on Fast Boot feature, every time you start the shutdown, Windows will proceed to close all applications and user tasks at that time, like normal shutdown.
However, instead of turning it off completely, Windows will save a snapshot of the session to hibernate file (hiberfil.sys) and when you open the computer to use it, it will use Use information from these files to boot faster.
Despite the above advantages, one of the worrying side effects of Fast Boot is affecting the encrypted drive.
In addition, there is a risk with Fast Startup that is affected by Windows Update. If your computer is turned off by Fast Startup, it will not perform a complete shutdown, so the installation of the update may not be complete.
Plus When you turn off the computer, activate Fast Boot, Windows will lock the hard disk partition to install it. You will not be able to access it from another operating system if your computer has a dual-boot configuration. Even worse, if you boot into another operating system and then access or change anything on the hard disk (or partition) that hibernation mode of Windows is used, it can be corrupted. always the operating system on the locked partition (for security). If booting with dual-boot, it’s best not to use Fast Boot or Hibernation mode.
Therefore, the best way to deactivate Fast Boot for Windows 10 is as follows.
Step 1: Right-click the Start button and select “Power Options”.
Step 2: Click on the “Additional power settings” option.
Step 3: Click on the “Choose what the power buttons do” option.
Step 4: Click “Change settings that are currently unavailable”.
Step 5: Remove the check mark “Turn on fast startup (recommended)”. Then press “Save changes” for the changes to take effect.
If you do not see the Fast Startup option appear, enter the command “powercfg / hibernate on” into Windows PowerShell and restart Windows, then repeat the above steps.
2. Reset virtual memory settings
With Windows computers, memory is divided into two different types: hard drive and RAM. When virtual physical RAM is used up, Windows uses more virtual RAM or Virtual Memory, turning the hard drive into RAM to complement the computer’s lack of RAM. Virtual RAM will combine with physical RAM and hard disk to handle applications and software on the system.
Some recent reports say their Windows 10 automatically changes virtual memory settings, leading to a prolonged boot time, sometimes causing problems during boot. Therefore, it is best to review your virtual memory settings and consider re-setting it properly to resolve this slow boot issue. As follows.
Step 1: Enter the keyword “settings: Performance” in the search box and click on the “Adjust the appearance and performance of Windows”.
Step 2: Performance Options dialog box appears, click on Advanced tab and click on Change option in Virtual memory section.
Step 3: Virtual memory settings dialog box appears, please uncheck the “Automatically manage paging file size for all drives” option and tick the Custom Size setting group, enter Initial Size line value 1.5 times the capacity Computer RAM and up to 3 times the Ram capacity in the Maximum Size line.
Finally, when set up, click OK to save and restart Windows to check the results.
3. Disable Linux Terminal
Linux Terminal, Linux Subsystem or Windows Subsystem for Linux (WSL) is a new feature to run Linux executable files (in ELF format) on Windows 10. This feature is very excited by the development community. received, but it is also identified as one of the causes of slow startup status for Windows 10.
Although Linux Terminal does not activate by itself but if for some reason you have turned it on, and is no longer using it, you can turn it off by the following way.
Step 1: Enter the keyword “Windows features” in the search bar and click on the “Turn Windows features on or off” result.
Step 2: The Windows features dialog box appears, go to the “Windows Subsystem for Linux” line and uncheck it. Click OK to save and restart Windows for the changes to take effect.
4. Update the graphics driver
Windows 10 before and after installing a graphics driver will result in extremely different boot times. Therefore, the first job that users need to do after installing new Windows 10 is to install the graphics driver. However, if your driver version is old, it will also be one of the causes of prolonged Windows boot time. Therefore, updating the graphics driver regularly is also a must.
If you are not sure which graphics card you are using, you can refer to Device Manager, Display adapters section.
In addition, some graphics drivers have built-in extended control software so you can use it to check and install new updates if available.
5. Delete some programs that start with Windows
If the above agents are not the cause of prolonged boot time of Windows 10, then the services and programs that start with Windows are the main culprits. And this is easily identifiable if your computer installs a lot of software, applications. Therefore, to find and delete services and programs that start with Windows, you can do the following.
Right-click the taskbar and select Task Manager.
In the Task Manager window, click on the Start-up tab, find the service, unnecessary program and right-click it, select Disable to finish.
6. If all does not return the desired results, perform the Reset
If you have tried all the above solutions and still cannot speed up the boot time for Windows 10, it is best to perform a data backup and reinstall Windows 10.
However, Windows 10 itself also gives you some options to reset your PC. Depending on your purpose, you can choose Reset this PC to refresh the original Windows installation without deleting any of your files or even so, you should back up your computer data. I let the incident happen.
Hope this article will be useful for you.
